I'd like to help! Please try the steps below to connect your printer to the network.-. Press the Wireless button ( ) and the Cancel button ( ) from the printer control panel at the same time, and then hold them for three seconds. -->On the printer control panel, press and hold the Wireless button and the Resume button together for three seconds.
Restart the router, the printer, and the PC. Use the WPS method - Connecting an HP Printer Using Wi-Fi Protected Setup (WPS) Make sure the printer and the PC are connected to the same wireless network. Either 2.4 or 5GHz network. If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be
HP Photosmart 5510 e-All-in-One Printer - B111a. Enter your serial number to check your warranty status. Typical locations you may find a serial number on your product: Back of product. Under the battery. For laptops, press Fn + Esc. For desktops, press Ctrl + Alt + s.Click on "How To" (with the spanner symbol) and then under the heading "Featured content", select "Connect to a Wireless HP Printer". This opens a new webpage. Step 1 is "Connect the Printer to the WiFi Network". Scroll down until you find the sub-heading "Printers without a touchscreen control panel" and follow the instructions. [3] Wireless performance is dependent upon physical environment and distance from the access point. Wireless operations are compatible with 2.4 GHz routers only; excludes wireless direct. Wireless direct may require driver or apps be installed and connected on wireless-enabled mobile device or PC. Check if wireless ON and wireless working say PASS. Restart the wireless router, the printer, and the PC. Use WPS to connect the printer to your wireless network. Locate the WPS button on your router, but do not press it yet. If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.
Hi, Can you see the control panel display with a zero or may you see any other number on the screen with any blinking light? Can you see the power light solid lit?
Figure : Example of the control panel buttons, icons, and lights. 1. Power button: Turns the printer on or off. 2. Back button: Returns to the previous screen. The button lights up when the feature is available. 3. Help button: Opens the Help menu for the current operation. The button lights up when the feature is available.Wireless operations are compatible with 2.4 GHz operations only. Remote printing requires an Internet connection to an HP web-connected printer. App or software and HP Smart app account registration may also be required. Wireless broadband use requires separately purchased service contract for mobile devices. Check with service provider for pJ6u.